L500 WHITE & DUAL WHITE/RED HIGH INTENSITY LED OBSTRUCTION LIGHT

KEY FEATURES

• Five year warranty
• Housing based on 30 years of experience offshore product design experience
• Lightweight and easy to install
• Extremely low wind factor
• Integrated design with built-in photocell and monitoring – no additional power supply enclosures required
• Built in GPS for synchronisation
• No maintenance required over service life
• Orga optical design produces highly accurate and uniform narrow light beam
• Optional Integrated automatic flash synchronisation between lights
• Extremely low power consumption
• Constant power draw for white variants – eliminates high peak power demands especially important when running from UPS
• 15 year field proven power supply technology
• Long life power supply to match LED life, does not use electrolytic capacitors
• Made in the Netherlands

STANDARDS/CERTIFICATION

• Complies with ICAO Annex 14 Volume 1, Sixth Edition, July 2013, Chapter 6, High Intensity Type B obstacle light
• Trafi wind turbines day markings and obstacle lights 12.11.2013

PERFORMANCE CHARACTERISTICS

• Horizontal beam pattern: 360°
• Flashing: see table
• Effective intensity: see table
• Vertical beam pattern: 3° minimum
• Infra-Red (if applicable) wavelength ~850nm

ELECTRICAL CHARACTERISTICS

• Operating voltage: 120-240Vac nominal 50-60Hz
• Power factor: >0.9 in day intensity mode
• Power consumption: see table
• Power consumption heater: standard 95w
• Overvoltage protection: Class III according to IEC61643-1

PHYSICAL CHARACTERISTICS

• Dimensions: L x W x H:
  see drawing
• Weight: 23kg
• Design degree of protection: IP65
• Operating temperature range:
  -40°C/+45°C
• Shipping information:
  666 x 666 x 530 mm; approx. 24.9 kg
• Supplied with pre-mounted Orga cable for easy installation and high reliability ready for use
• Cable bending radius static: 7x cable diameter
• Outer cable diameter: Ø12.5 +/- 0.5 mm
• Cable weight: 260 g/m
• Level indicators for correct mounting

SYSTEM DESIGN, CONTROL AND MONITORING

• Use as a stand-alone light, or in a multiple light system with an Orga CIP controller
• Optional Orga CIP controller facilities provide control interfaces for:
  – ‘smart switch’ aircraft detection input
  – Remote photocell control input/override
  – Visibility condition variable intensity input; intensity steps 100%, 30% and 10%